OPERATOR’S STATION
10. Press right (C) arrow to select YES. Press
SELECT (D).
11. Press and left (B) or right (C) arrow to cycle through the
last 10 recorded engine error codes until EXIT ENGINE
CODES is displayed.
• Refer to
8.4 Engine Error Codes, page 469
.
12. Press right (C) arrow to select YES. Press
SELECT (D).
13. Press
PROGRAM
(A)
to
exit
Programming
Mode or press SELECT (D) to proceed to next
DIAGNOSTIC MODE.
Figure 3.161: M155 Engine Codes
Switching the Installed Header Sensors On or Off
You can selectively enable or disable header sensors in the event of a malfunction or as part of a
troubleshooting routine.
NOTE:
• The header
MUST
be attached to the windrower to perform this procedure. The cab display module (CDM)
automatically adjusts its programming for each header. For more information, refer to
4.5 Attaching and
Detaching Headers, page 213
.
• Disabled sensors
fl
ash the word SENSOR on CDM during regular operation.
1. Turn ignition key to RUN, or start the engine.
2. Press PROGRAM (A) and SELECT (C) on cab display
module (CDM) to enter Programming Mode.
• WINDROWER SETUP? is displayed on the
upper line.
• NO/YES is displayed on the lower line.
3. Press SELECT (C) until DIAGNOSTIC MODE? is
displayed on the upper line.
• NO/YES is displayed on the lower line.
4. Press right (B) arrow to select Yes. Press SELECT (C).
• VIEW ERROR CODES? is displayed on the
upper line.
Figure 3.162: M155 CDM Programming Buttons
147649
131
Revision A
Summary of Contents for M155
