![background image](http://html.mh-extra.com/html/macdon/m155/m155_operators-manual_685734214.webp)
OPERATION
Float Options
For draper headers without the deck shift option, auger headers, and rotary headers, the
fl
oat can be
preprogrammed for three types of windrowing conditions.
Example:
• Position 1: Border
• Position 2: Normal
• Position 3: Rocky
Set
fl
oat presets as follows:
1. Engage header.
2. Push FLOAT PRESET SWITCH (A) to Position 1 (B).
Figure 4.80: Float Preset Switch
3. Using HEADER TILT switches (D, F), set center-link to
mid-range position (5.0 on CDM [A]).
4. Using HEADER DOWN switch (E), lower header fully
with lift cylinders fully retracted.
5. Set left (B) and right (C)
fl
oat
fi
ne adjustments on CDM
to approximately 5.0 as follows:
a. Using FLOAT SELECTOR switch (B), push
+
to
increase
fl
oat or
–
to decrease
fl
oat on left side of
header. CDM display (A) will indicate selected
fl
oat
for left side, for example (5.0 L FLOAT R XX.X).
b. Repeat for right side
fl
oat with switch (C).
Display will indicate
fl
oat for both sides, for
example (5.0 L FLOAT R 5.0).
Figure 4.81: Operator Console
A - CDM Display
B - Adjust Left Float
C - Adjust Right Float
D - Header Tilt Down
E - Lower Header
F - Header Tilt Up
147649
198
Revision A
Summary of Contents for M155
