OPERATION
4. Push up on actuator rod and lock pin should lift with
the handle.
Figure 4.96: Center-Link Hook
4.4.6
Cutting Height
Figure 4.97: Operator Console
Cutting height is adjusted by raising or lowering the header with the HEADER UP (B) or HEADER DOWN (C)
switches on the ground speed lever (GSL).
The cab display module (CDM) indicates header height with a reading on the DISPLAY (A) lower line between 00.0
and 10.0, with 00.0 being on the ground.
Use DISPLAY SELECTOR switch (D) to display the current setting.
147649
206
Revision A
Summary of Contents for M155
