214685
297
Revision A
Adjusting Header Raise Rate (New Holland CR/CX Series)
If necessary, the header raise rate (the first speed on the HEADER HEIGHT rocker switch of the multifunctional
handle) can be adjusted.
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the
combine operator
’
s manual for updates.
NOTE:
For New Holland CR models 6.80, 6.90, 7.90, 8.90, 9.90, and 10.90, refer to
7.1.16 New Holland Combines (CR
Model Year 2015 and Later), page 300
Figure 7.319: New Holland Combine Display
1.
Select HEADER RAISE RATE on the combine display.
2.
Use the + or
–
buttons to change the setting.
3.
Press ENTER to save the new setting.
NOTE:
The raise rate can be changed from 32
–
236 in steps
of 34. The factory setting is 100.
Summary of Contents for FlexDraper FD1 Series
