MacDon FlexDraper FD1 Series, Unloading And Assembly Instructions

Page: 132 / 354

214685
120
Revision A
Figure 6.23: Torque Wrench Storage Location
11. Remove the supplied torque wrench (A) from its storage
position at the right side of the float module frame. Pull
in the direction shown to disengage the wrench from
the hook.
Figure 6.24: Float Module
–
Left Side
12. Place torque wrench (A) onto float lock (B). Note the
position of the wrench for checking left or right side.
13. Push down on wrench to rotate bell crank (C) forward.
Figure 6.25: Float Module
–
Right Side
PERFORMING PREDELIVERY CHECKS