MacDon FlexDraper FD1 Series, Unloading And Assembly Instructions

Page: 114 / 354

214685
102
Revision A
Closing Endshields
Figure 5.95: Left Endshield
1. Disengage lock (B) to allow endshield to move.
2. Insert front of endshield behind hinge tab (A) and into
divider cone.
Figure 5.96: Left Endshield
3. Swing endshield in direction (A) into closed position.
Engage lock with a firm push.
4. Check that endshield is locked.
Installing Crop Divider Rods
Figure 5.97: Divider Rod on Crop Divider
1. Remove divider rods from shipping location on header
endsheet.
2. Position crop divider rod (B) on tip of crop divider as
shown and tighten bolt (A).
3. Repeat procedure at opposite end of header.
ATTACHING HEADER TO COMBINE