MacDon FlexDraper FD1 Series, Unloading And Assembly Instructions

Page: 76 / 354

214685
64
Revision A
Figure 5.7: Switch and Console
9. Mount switch plate onto console (A) in a
comfortable position.
10. Connect harness to switch with red wire to center
terminal (B), and white wire to either outer terminal (C).
11. Reconnect the battery cable.
12. Operate the switch to select either REEL FORE-AFT or
HEADER TILT function.
5.1.2 Attaching Header to a Challenger, Gleaner, or Massey Ferguson
Combine
WARNING
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
Figure 5.8: AGCO Group Feeder House
1. Use the lock handle (B) to retract the lugs (A) at the
base of the feeder house.
ATTACHING HEADER TO COMBINE