214685
119
Revision A
Figure 6.21: Header Float Lock (in Locked
Position)
9.
Disengage both header float locks by pulling the float
lock handle (A) away from the float module and pushing
the float lock handle down and into position (B)
(
UNLOCK
).
Figure 6.22: Left Wheel
10. Place stabilizer wheels and slow speed transport
wheels (if equipped) in storage position as follows:
a.
Support the wheel weight by lifting slightly with one
hand, and pull up on handle (A) to release the lock.
b.
Lift the wheels to the desired height, and engage
the support channel into the slot (B) in the upper
support.
c.
Push down on the handle (A) to lock.
Summary of Contents for FlexDraper FD1 Series
