MacDon FlexDraper FD1 Series, Unloading And Assembly Instructions

Page: 184 / 354

214685
172
Revision A
Figure 7.34: Combine Controls
1. Use HEADER SETTINGS key (M) to display the
HEADER SENSITIVITY CHANGE page as shown in
Figure
7.35, page 172 .
2. Use the UP or DOWN keys (E) or (H) to adjust the
highlighted item. The height sensitivity setting range is 0
(least sensitive) to 250 (most sensitive) in
increments of 10.
NOTE:
Adjustments take effect immediately. Use the CANCEL
key to return to the original settings.
3. Use HEADER SETTINGS key (M) to highlight the next
changeable item.
4. Use ENTER key (D) to save changes and return to the
monitor screen. If there are no changes, the screen will
return to the monitor screen after 5 seconds.
Figure 7.35: Height Sensitivity Change Page
SETTING UP AUTO HEADER HEIGHT CONTROL