MacDon FlexDraper FD1 Series, Unloading And Assembly Instructions

Page: 319 / 354

214685
307
Revision A
•
The header is attached to the combine.
•
The combine is on level ground, with the header level to the ground.
•
The header is on down stops, and the center-link is set to D .
•
The engine is running.
•
The combine is not moving.
•
No faults have been received from the header height controller (HHC) module.
•
Header/feeder is disengaged.
•
Lateral float buttons are NOT pressed.
•
ESC key is NOT pressed.
To calibrate the AHHC, follow these steps:
Figure 7.339: New Holland Combine Display
1. Select CALIBRATIONS (A) on the main screen. The
CALIBRATION screen displays.
Figure 7.340: New Holland Combine Display
2. Select the CALIBRATION drop-down arrow (A).
SETTING UP AUTO HEADER HEIGHT CONTROL