MacDon FlexDraper FD1 Series, Unloading And Assembly Instructions

Page: 79 / 354

214685
67
Revision A
Figure 5.14: Combine Receptacle
9. Push the handle (A) on the combine to the fully-open
position.
10. Clean the mating surfaces of the multicoupler (B) and
receptacle if necessary.
Figure 5.15: Multicoupler
11. Position the multicoupler (A) onto the combine
receptacle, and pull the handle (B) to fully engage the
multicoupler into the receptacle.
12. Connect the reel fore-aft/header tilt selector harness (C)
to the combine harness (D).
Figure 5.16: Driveline
13. Detach safety chain (C) from support bracket (B).
14. Pull collar (D) back to release driveline (A) from support
bracket. Remove the driveline from support bracket.
ATTACHING HEADER TO COMBINE