MacDon FlexDraper FD1 Series, Unloading And Assembly Instructions

Page: 233 / 354

214685
221
Revision A
Figure 7.152: CLAAS Combine Display,
Console, and Control Handle
7. Press control knob and a progress bar chart (A) will
appear.
8. Follow the prompts on the screen to raise the reel.
9. Follow the prompts on the screen to lower the reel.
Figure 7.153: CLAAS Combine Display,
Console, and Control Handle
10. Ensure the progress bar chart displays 100% (A). The
calibration procedure is now complete.
Adjusting Auto Reel Height (CLAAS 600 and 700 Series)
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the
combine operator
’
s manual for updates.
To adjust the auto reel height, follow these steps:
SETTING UP AUTO HEADER HEIGHT CONTROL