MacDon FlexDraper FD1 Series, Unloading And Assembly Instructions

Page: 107 / 354

214685
95
Revision A
Figure 5.78: Combine Coupler
14. Remove hydraulic quick coupler (A) from the storage
plate on the combine, and clean the mating surface of
the coupler.
Figure 5.79: Connections
15. Position coupler (A) onto the float module receptacle,
and push handle (B) to engage the pins into the
receptacle.
16. Push handle (B) to closed position until lock button (C)
snaps out.
17. Remove the cover on the float module electrical
receptacle.
18. Remove connector (D) from the combine.
19. Align the lugs on connector (D) with the slots in the float
module receptacle, and push the connector onto the
receptacle. Turn the collar on the connector to lock it in
place.
Figure 5.80: Driveline in Storage Position
20. Detach safety chain (C) from support bracket (B).
21. Pull collar (D) back to release driveline (A) from support
bracket. Remove the driveline from support bracket.
ATTACHING HEADER TO COMBINE