![background image](http://html2.mh-extra.com/html/macdon/flexdraper-fd1-series/flexdraper-fd1-series_unloading-and-assembly-instructions_3353032031.webp)
214685
19
Revision A
Figure 3.6: Reel Right Lift Cylinder Attachment
5.
Lift reel and remove pins from the endsheet and the
reel arm.
6.
Align the reel lift cylinder mounting bolts with the lug on
the endsheet and the hole in the reel arm.
7.
Secure cylinder to endsheet and reel arm with clevis
pins (A) and (B) as shown.
•
Insert cotter pin into clevis pin (A) on
OUTBOARD
side of reel arm.
•
Insert cotter pin into clevis pin (B) on
INBOARD
side
of endsheet.
Figure 3.7: Lifting Double Reel
8.
Position sling (A) around the reel tube near the reel
center support arm. Raise lifting device to relieve load
on shipping supports (B).
Summary of Contents for FlexDraper FD1 Series
