MacDon FlexDraper FD1 Series, Unloading And Assembly Instructions

Page: 104 / 354

214685
92
Revision A
5.5 New Holland Combines
The FD1 Series FlexDraper
®
is compatible with the following New Holland combines:
Series Combine Model
920, 940, 960, 970, 980
CR 9020, 9040, 9060, 9065, 9070, 9080
6090, 7090, 8080, 8090, 9090
6.80, 6.90, 7.90, 8.90, 9.90, 10.90
840, 860, 870, 880
CX
8070, 8080, 8090
8080 Elevation, 8090 Elevation
5.5.1 Attaching Header to New Holland CR/CX Combine
WARNING
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
Figure 5.71: Combine Float Module Upper
Left Side
1. On the upper left side of the combine float module,
remove nut (A), washer, spring, and lever (B).
ATTACHING HEADER TO COMBINE