214685
111
Revision A
6.5
Checking Oil Level in Header Drive Gearbox
WARNING
To avoid bodily injury or death from unexpected start-up of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
Figure 6.8: Header Drive Gearbox
1.
Lower the header to the ground and ensure the gearbox
is in working position.
2.
Shut down the engine, and remove the key from the
ignition.
3.
Remove the oil level plug (A) and check that the oil level
is up to the bottom of the hole.
4.
Reinstall the oil level plug (A).
Summary of Contents for FlexDraper FD1 Series
