MacDon FlexDraper FD1 Series, Unloading And Assembly Instructions

Page: 231 / 354

214685
219
Revision A
Figure 7.147: CLAAS Combine Display,
Console, and Control Handle
4. Use control knob (A) to raise or lower the reel speed.
NOTE:
This option is only available at full throttle.
Calibrating Reel Height Sensor (CLAAS 600 and 700 Series)
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the
combine operator
’
s manual for updates.
To calibrate reel height, follow these steps:
1. Place header off the ground 15
–
25 cm (6
–
10 in.).
Figure 7.148: CLAAS Combine Display,
Console, and Control Handle
2. Use control knob (A) to highlight the FRONT
ATTACHMENT icon (B) and press control knob (A) to
select it.
SETTING UP AUTO HEADER HEIGHT CONTROL