MacDon FlexDraper FD1 Series, Unloading And Assembly Instructions

Page: 286 / 354

214685
274
Revision A
Checking Reel Height Sensor Voltages (John Deere S and T Series)
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the
combine operator
’
s manual for updates.
Figure 7.264: John Deere Combine Display
1. Press CALIBRATION icon (A) on the main screen of the
monitor. The CALIBRATION screen appears.
Figure 7.265: John Deere Combine Display
2. Press DIAGNOSTIC READINGS icon (A) on the
CALIBRATION screen. The DIAGNOSTIC READINGS
screen appears. This screen provides access to
calibrations, header options, and diagnostic
information.
Figure 7.266: John Deere Combine Display
3. Select drop-down menu (A) to view the list of calibration
options.
SETTING UP AUTO HEADER HEIGHT CONTROL