214685
28
Revision A
3.4
Installing Driveline
CAUTION
To prevent injury to the installer and damage to the driveline, hold the driveline so that it doesn
’
t fall to the
floor or ground.
NOTE:
Case New Holland drivelines are stored in a lower position on the float module. If installing a Case New Holland
driveline, proceed to Step
Figure 3.24: Driveline Support
1.
Position the driveline storage support (A) onto the left
side frame of the float module. Secure in place with two
M10 carriage bolts and hex flange nuts (B).
Figure 3.25: Driveline Support
–
Case New
Holland
2.
Case New Holland only:
Position the driveline storage
support (A) onto left side of bracket (B) as shown.
Secure in place with two M12 hex head bolts (C) and
hex flange nuts.
NOTE:
The support for 21-tooth spline drivelines is shown in
the illustration at right. The support for 6-tooth spline
drivelines is similar.
Summary of Contents for FlexDraper FD1 Series
