214685
88
Revision A
Figure 5.62: Locking Pins
5.
Remove locking pin (B) from float module pin (A).
Figure 5.63: Engaging Pins
6.
Lower handle (A) to engage float module pins (B) into
the feeder house. Reinsert locking pin (C) and secure
with the hairpin.
7.
Remove the blocks from under the cutterbar.
CAUTION
Never start or move the machine until you are sure all
bystanders have cleared the area.
8.
Start the engine and lower the header.
9.
Stop the engine and remove the key from the ignition.
Figure 5.64: Combine Coupler
10. Unscrew knob (A) on combine coupler (B) to release
the coupler from the combine receptacle and clean the
coupler.
Summary of Contents for FlexDraper FD1 Series
