Quick Setup
8/121
Operating Manual dryve D1, ST-, DC-, EC/BLDC-Motor Control System - V2.4
Connect the components in accordance with the following diagrams and instructions. When connecting the cores, take note of
the following illustrations, which are intended to assist you.
1.
Press the orange spring
into the connector by hand
or with pliers and hold
the spring down.
2.
After removing the insulation, push
the cores (X1 and X5: 10 mm, X2: 8 mm)
deeply into the opening.
3.
Release the orange spring
X1 Logic/Load Voltage Connector
1.
Connect inputs X1.1 and X1.3 to the voltage supply
2.
Connect input X1.2 to 0 V
X2 Digital Inputs Connector
1.
Connect inputs X2.11 and X2.12 in accordance with the following diagram.
