Initial Operation and User Interface
52/121
Operating Manual dryve D1, ST-, DC-, EC/BLDC-Motor Control System - V2.4
Preferred IP Address Assignment Method Selection
1.
Select "Automatic IP" or "Manual IP"
2.
In the case of "Automatic IP", no further settings must be made
Please go straight to point 6
3.
Entry of the desired "IP Address"
4.
Entry of the desired "Subnet Mask"
5.
Entry of the desired "Standard Gateway"
6.
Possible entry of the desired "Host Name"
7.
Application of the TCP/IP settings via the "Reboot" button
5.6.2 Transmission Protocol
Selection of whether an unencrypted or encrypted connection to the web server of the dryve D1 motor control system is to be
used.
“http” is set as the standard communication method.
Setting
Description
HTTP
The Hypertext Transfer Protocol is used to transfer data between the browser and the dryve
D1 motor control system without encryption.
HTTPS
The Hypertext Transfer Protocol Secure performs the same task as
“http”, but encrypted.
This enables the establishment of an encrypted connection between the dryve D1 motor
control system and the browser.
The
“HTTPS” method is used by all normal browsers and therefore does not have to be
installed separately. If HTTPS has been activated, HTTPS:// must be entered in front of the
IP address to establish a connection to the dryve D1.
HTTPS Certificate
The use of
“HTTPS” requires a digital certificate that uniquely identifies the server (dryve)
and the client (browser). If there are special guidelines regarding the setting-up of a
“HTTPS”
connection, please consult your IT department.
External HTTPS Certificate
A certificate that has been especially issued for the dryve D1 by an official or non-official
certification authority (CA).
Self-Signed HTTPS
Certificate
A
“HTTPS” certificate is generated for the IP address assigned to the dryve D1 at this time
and is automatically stored in the browser. If an encrypted connection is established via
“HTTPS”, it is recommended that a
generation.
