Initial Operation and User Interface
47/121
Operating Manual dryve D1, ST-, DC-, EC/BLDC-Motor Control System - V2.4
5.5.3 Limit Switch
Specification of the position and number of limit switches used.
Setting
Description
None
No limit switch installed on the axis
Negative
Limit switch placed at the negative end of the axis
Positive
Limit switch placed at the positive end of the axis
Negative and Positive
Limit switches placed at the positive and negative ends of the axis
Position specification and selection of limit switches
1.
View from drive shaft onto motor block
2.
Clockwise motor rotation
3.
End position of the movement corresponds to the positive limit switch position
Please refer to the corresponding limit switch datasheet for a correct connection.
1.
In the "Position" drop-down menu, select the limit switches installed on the axis.
Positive axis end
