Initial Operation and User Interface
66/121
Operating Manual dryve D1, ST-, DC-, EC/BLDC-Motor Control System - V2.4
1.
Select "ARO"
in the “Mode” drop-down menu
2.
Select the desired motor rotation direction at “Position”
3.
Enter the desired values for "Acceleration" and "Deceleration". If no value or a 0 (zero) is entered at "Deceleration",
the value from "Acceleration" is used
4.
The final setup of the
“ARO” positioning mode is described at
Signal Exchange, Binary (p.69)
1.
Select "ADR"
in the “Mode” drop-down menu
2.
Enter the desired values for "Acceleration" and "Deceleration". If no value or a 0 (zero) is entered at "Deceleration",
the value from "Acceleration" is used
3.
The final setup of the “ADR” positioning mode is described at
Signal Exchange, Binary (p.69)
1.
Select "APS
" in the “Mode” drop-down menu
2.
Enter the desired values for "Acceleration", "Velocity" and "Deceleration". If no value or a 0 (zero) is entered at
"Deceleration", the value from "Acceleration" is used
3.
The final setup of the “APS” positioning mode is described at Signal Exchange, Binary (p.69)
