Quick Setup
7/121
Operating Manual dryve D1, ST-, DC-, EC/BLDC-Motor Control System - V2.4
2 Quick Setup
Thank you very much,
for choosing the dryve D1 motor control system!
In the following, "quick initial operation" it is explained how to setup the dryve D1 and to control a stepper or DC-Motor with a
PC. The dryve D1 motor control system has been designed for operation with direct voltage.
In this “quick initial operation” guide
a voltage of 24 V is being used.
Within just a few minutes, you will be able to operate your motor and even create your first fully automatic motion program.
Have fun!
Minimum requirements for initial operation of the dryve D1 with a PC
1.
Voltage supply of 12 to 24 V with cables
2.
Motor without feedback or
brake with appropriate cable
3.
Ethernet cable
4.
PC/Notebook
