Initial Operation and User Interface
29/121
Operating Manual dryve D1, ST-, DC-, EC/BLDC-Motor Control System - V2.4
5.2 User Interface Information
Navigation Menu
The desired page will be displayed by clicking on the corresponding tab in the grey navigation menu at the left-hand edge of the
screen. The page currently being shown is highlighted in orange.
Switches
The status of the individual ON/OFF switches and Either-Or switches can be changed by clicking on them.
Status Area
The status area is located underneath the navigation menu. The current action status as well as warnings and error messages
are shown in the upper part. In the lower part, the controller temperature, the Motor Current, the actual-and the set-position are
shown.
Help Buttons
Detailed information to the corresponding functions are available for display via the Help Buttons.
NOTE
A response or execution time of control commands and feedback requests cannot be guaranteed. The provision of
information and response times are dependent on the used Ethernet network. There is no guaranteed response time or
execution time for control of the dryve D1 motor control system via the user interface in the browser.
For this reason, use the user interface in the browser only for initial operation or diagnosis.
