Initial Operation and User Interface
33/121
Operating Manual dryve D1, ST-, DC-, EC/BLDC-Motor Control System - V2.4
Update process
1.
Deactivate the dryve D1 via disabling the Digital Input 7 “Enable” (external signal or use of the switch on
“Inputs/Outputs” page
2.
Click on "Update"
3.
The file manager of the browser opens automatically
4.
Navigate to the storage location of the firmware file (dryve-D1-1-XXXXXXXX.cpio)
5.
Select it and click on "Open"
6.
The update now starts automatically. If the function for automatic IP Address Assignment is used, a new address may
be shown in the Status Display after the update.
NOTE
It is recommended to reduce the Ethernet communication to a minimum while the update is executed.
It is advised not to use the browser for additional activities,
don’t execute programmes which need to communicate via the
Ethernet and
don’t start or at least pause big data movements.
5.3.7 Password
Available are "Admin" (administrator) and "Guest". Users can be activated or deactivated with the respective switches. If both
users have been deactivated, the user interface is entered as the "Admin" without a previous password entry. The "Guest" can
only be activated if the "Admin" has been previously activated.
1.
Activate the corresponding switch
2.
Click on "Change"
3.
Enter your password (maximum 30 characters) and repeat it
4.
Confirm the password by clicking on "OK"
User
Access Rights
Admin
Read/Write rights
Guest
Read rights