Initial Operation and User Interface
32/121
Operating Manual dryve D1, ST-, DC-, EC/BLDC-Motor Control System - V2.4
5.3.5 Configuration
The whole parametrisation, as well as the Drive Profile can be saved and reloaded as a configuration file.
Configuration Name Assignment
1.
Click in the blank text field and enter the desired configuration name. 40 characters are available.
2.
Leave the field by clicking somewhere outside the text field
3.
The new Configuration Name is now set and displayed on top of the user interface
Save
1.
Click on "Save"
2.
The current configuration is downloaded as a .txt file and is placed in the standard download directory of your computer
Load
1.
Deactivate the dryve D1 via disabling the Digital Input 7
“Enable” (external signal or use of the switch on
“Inputs/Outputs” page
2.
Click on "Load"
3.
The file manager of the browser opens automatically
4.
Navigate to the storage location of your configuration
5.
Select it and click on "Open"
6.
The desired configuration is now loaded into the dryve D1 and is active immediately
5.3.6 Firmware
If necessary, the Firmware of the dryve D1 can be updated with a build in routine. The currently installed version is shown under
"Version".
Downloading the update file
To download a new Firmware the used computer must be connected to the Internet. The update file
(dryve-D1-1-XXXXXXXX.cpio) can be found in a ZIP directory together with the release notes.
1.
Click on "Search".
2.
Your browser is downloading the update directory automatically
3.
The update file is placed in your download folder
4.
Unpack the ZIP file in a folder of your choice
