Dynapac PL2000F, Instruction Manual

Page: 193 / 283

Miscellaneous
182 4812313240.pdf
2017-12-1
Activities and preventive measures:
- In order to achieve a lower transport height, the
machine is evenly lowered down to the upper
section of the separated traction unit supports.
When in this position, the milling tool tips of the
milling drums are just (approx.1cm) above the
ground and can if necessary be gently rested on a
wooden supporting if fitted.
- Sliding shoe and scraper plate are raised slightly,
- Weather protecting sun roofs, ladders, operating
equipment should be folded in or removed.
- The parking brake is engaged and the engine
switched off.
- do not leave any insecure components on the
machine or the load surface.
When transporting machines with a foldable
discharge conveyor, this is placed on the front
locating surface of the transporter and if
necessary secured separately.
- Securely fix the machine to the four fix points
provided on the transporter.
Fig. Transport the foldable conveyor