Dynapac PL2000F, Instruction Manual

Page: 44 / 283

Machine description
33
4812313240.pdf
2017-12-1
Frame and assembly: Robust,
distortion-resistant steel welded design with
useful brackets for supporting the assemblies,
units, attachments and tanks. All parts can be
easily accessed for maintenance and repair work.
Operator’s control station: Operator’s control
station is located in the central part of the
machine and can be reached via two ladders.
Two ergonomic seats ensure that the planer can
be conveniently operated from both sides and that
the operator has a good overview of and can
monitor the milling process. The control station
has an innovative sliding system that enhances
the visibility of the operator. The full station can
slide 400mm on both sides of the frame.
The cold planer can be fitted with a weather
protecting sun roof (can be folded in) and all-round
panels as an option. During transport, the roof
can be folded forwards hydraulically and secured
on the water tank.
Controls at operator’s control station: An
operating panel, the position of which can be
easily adjusted, can be locked on the right and left
and contains all operating and control elements
required. If necessary, the machine operator can
move this into any other position required, even
beyond the edge of the machine. The securely
arranged controls are obviously marked for all
applications.
Steering and feed are simultaneously controlled
using a drive lever, designed as a joystick. A
second joystick controls the position of the
discharge conveyor and its speed (controlled in a
gradual manner).
A LC display integrated in the operating panel
rapidly and comprehensively informs the