Dynapac PL2000F, Instruction Manual

Page: 240 / 283

Maintenance
229
4812313240.pdf
2017-12-1
Bleeder
The bleeder can be found on the housing of the
pump distribution transmission.
The functioning of the bleeder must be ensured.
If soiling has occurred, the ventilator should be
cleaned.
Oil cooler
Check the radiators of the cooler daily for
soiling and leakage.
The oil cooler is located at the rear of the
machine, behind the cooler grill (to the left of
the water cooler). The cooler grill can be
swiveled upward after opening the lock using
a square key.
In the case of especially strong soiling, it is a
good idea to first spray the cooler with a
suitable dirt solvent and to then sprays the dirt
off with a water jet.
Fig. Bleeder
Fig. Oil cooler