Dynapac PL2000F, Instruction Manual

Page: 178 / 283

Operation
167
4812313240.pdf 2017-12-1
6
4
External starting (starting aid)
If the batteries are flat and the starter is not
running, the engine can be started using an
external source of power.
The following are suitable as sources of power.
- Another vehicle with a 24V system;
- Additional 24V battery;
- Starting aid, 20V/100A.
Normal charge devices and rapid charge.
Devices are not suitable as starting aids.
To externally start the engine;
- Use appropriate to connect up source of
power.
Check correct polarity! Always connect the
negative cable last and remove it first.
- Insert ignition lock in position “0”.
- Switch on ignition (pos.1).
Start screen (4) appears on display.
Position diodes of main operating panel light up.
- The start screen (4) is displayed while the
on-board computers is booting up.
- Once the booting procedure is complete the
main screen (5) appear on the display.
- Press the start button (6).
-
Press the button to start the planer
.
Once the engine is running:
- Disconnect external source of power.
When using starter aid spray, note the engine’s
Operating instructions.
See main screen information from “Machine
description” section.
5
Fig. 4. Start screen;
5. Main screen;
6. Start/stop button;