Dynapac PL2000F, Instruction Manual

Page: 100 / 283

Machine description
89
4812313240.pdf 2017-12-1
Leveling, setting leveling value
The setting value and actual measured value
of leveling system are displayed in this screen.
The actual travelling speed of planer displayed
at the upper position of the screen.
1. Indicates actual measured value of leveling system.
2. Indicates the setting value of leveling system.
3. Button on the display. Select corresponding button for each specific action.
4. Action menu, corresponding button on the display (3) which controls selecting
each action.
Press Button B to change the value from left to right.
The setting depth of left side is increased by 0.1 cm at each press of button D
, and it is decreased by 0.1cm at each press of button E . Press and
hold for continuous change.
Inputting focus (red frame) switches from left to right in turn at each press of
button B .
Press button C to switch ground plate control mode with the same side of
inputting point (in red frame), gray means turn off , and green means
activation . The display of depth is shown in percentage when the ground plate
control mode is activated.
Press button G to return to the main interface.
3
2
1
4
B
C
D
E
F
G