Dynapac PL2000F, Instruction Manual

Page: 147 / 283

Machine description
136
4812313240.pdf
2017-12-1
“Scraper flap function changeover” valve
The valve for the raise and lower scraper flap /
swivel scraper flap function changeover (1)
can be found above the frame on the
right-hand side of the machine behind the
milling drum box.
- Switch position (1): raise/lower scraper flap.
- Switch position (2): swivel scraper flap
(open / close).
Switch position (1) should only be selected for
the working site, switch position (2) is used for
maintenance and repair work.
Observe safety precautions when the
scraper flap is open.
“Discharge conveyor function
changeover” valve
The valve for changing over between
discharge conveyor in operating
position/discharge conveyor in floating
position function can be found on the left-hand
side of the machine, in the front section of the
inside of the frame.
- Switch position (1): discharge conveyor in
operating position.
- Switch position (2): discharge conveyor or
in floating position (transport position).
- Switch position (1) is for the working site
and should be selected for transport tasks
during which the discharge conveyor is
rigidly placed on the trailer, ie. No swivel
movement.
- Switch position (2) should be selected for
transport tasks during which the discharge
conveyor is flexible mounted, e.g. placed
on a support fixture on the tractor machine
of the trailer.
1
2
Fig. Switch position 1, 2
Fig. Switch position 1, 2
1
2