Dynapac PL2000F, Instruction Manual

Page: 65 / 283

Machine description
54 4812313240.pdf
2017-12-1
Pos. Designation Brief description
1
Control lever discharge
conveyor
Controls the following functions of the discharge
conveyor „Swivel“, „Raise“, „Lower“. It also
provides infinitely variable control for the conveyor
speed.
2
Control lever for travel
drive
Is used after system is unlocked for the purposes
of driving, steering and braking.
In conjunction with the appropriate activated
automatic function, when the lever is swiveled
out, the leveling unit, water spray and cooling
system and the appropriate loading belt is
activated or de-activated in neutral position.
3 Switching table
Consists of an appropriately labeled keypad with
pre- defined push buttons for all work and
inspection functions. The operating status of the
main functions is displayed by means of LEDs.
The system also includes:
- ignition lock
- rotary switch for work lighting and warning lamps
- EMERGENCY STOP impact switch
4 Display indicator
Used in conjunction with the menu bar to display
actual statuses, changes in setting values and to
provide information about malfunctions
5 Steer mode selector
Steering mode is controlled by the dual-axis
control lever.
- Push the control lever forward, the front drive
units are swiveled to the straight-forward position.
- Pull it backward, the rear drive units are
swiveled to the straight-forward position.
- Turn it to the left, the rear drive units are
swiveled to the right and the planer turns to the
left.
- Turn it to the right, the rear drive units are
swiveled to the left and the planer turns to the
right.
6 Securing handle
To release and secure the operating panel when
moving the operating panel beyond the outer
edge of the machine.
The operating panel can only be adjusted if the
machine is stationary.