Dynapac PL2000F, Instruction Manual

Page: 23 / 283

Safety - General instructions
12 4812313240.pdf
2017-12-1
Headlights, indicators rotary beacons
Lights for illuminating different operating
areas and for indicating danger areas
and/or dangerous situations are located
at various machine positions.
Several contacts, to which headlights can
be connected, can be found around the
machine.
The headlights, indicators and rotary
beacons can be activated using the
appropriate switches on the upper control
panel.
The function of the headlights and
warning lamps should be checked on a
daily basis before starting work.
The headlights can be simply removed
and should be taken off from easily
accessible points and safely stored once
work is complete.
Headlight contacts which are not used
should be protected using rubber caps.