Dynapac PL2000F, Instruction Manual

Page: 153 / 283

Machine description
142
4812313240.pdf
2017-12-1
Typical wear marks on tool holder
New bit box
Strong wear of contact surfaces of
bit - replace as soon as possible
Strong wear of hole for bit - replace as
soon as possible
Strong wear of flank - replace immediately
To check and replace bits and bit boxes, the following safety measures are to be
met and enforced:
- Apply traction unit supports.
- Open and secure the drum flap.
- Lift the side boards and secure them.
- Ensure that the drive engine cannot be started.
If a pneumatic driver is used, heed the required safety measurement!