Dynapac PL2000F, Instruction Manual

Page: 180 / 283

Operation
169
4812313240.pdf 2017-12-1
Driving the machine
- Smoothly raise the machine by pressing
button (1) or buttons (2), (4) until the distance
required between the machine and ground
has been reached.
-
Never fully raise the machine for driving
purposes!
- Risk of tipping!
- Slightly raise sliding shoe by pressing button
(32).
- Slightly raised scraper board by pressing
button (35).
- Check whether all other position diodes of the
main operating panel are switched to „0“, if
necessary, press button to change over.
Always engage the warning lights (rotary
beacons and hazard flasher) and unfold the
warning sign when moving the machine!
- Slide unlocking switch of right-hand control
lever forwards and at the same time side the
control lever in the direction of travel required until
the machine starts to move.
- The unlocking switch can be released as soon
as the machine moves.
In an emergency, press the emergency
stop button or one of the emergency stop
buttons on the side operating units.
See button function description from “Machine
description” chapter.
32 35
3
1 2 4
Fig. Switch panel, ergo control
panel