Dynapac PL2000F, Instruction Manual

Page: 163 / 283

Machine description
152
4812313240.pdf
2017-12-1
Sensor selection
If several sensors are connected to the MLS 508 CAN-bus network at the same time,
the desired sensor can be selected by using the sensor selection
menu. Please note that the sensor has to be connected to and mounted on the side of
the machine corresponding to the respective control loop. Control operations are then
carried out with the selected sensor.
Sensor selection for the control loops left and right
1) Press the sensor change key of the control loop (left or right) for the
sensor to be changed.
350 3.26
0 4.00
A list of all sensors connected to the respective machine side is displayed.
2) Select the desired sensor by using the UP/DOW N keys (the
selected line is highlighted).
Sonic ‐ ski Ground
Cross slope
OFFSET CONFIG
Calling up the sensor selection menu for the left control loop
Selecting the active sensor for the left control loop
Sonic ‐ ski Ground
Left sensor select
Cross slope
No sensor
Select
HELP ENTER
EXIT
Sonic ‐ ski string