Dynapac PL2000F, Instruction Manual

Page: 104 / 283

Machine description
93
4812313240.pdf 2017-12-1
This screen displays the speed of four hydraulic motors of the driving system in rmp.
Press button C to switch back to the previous electrical page and press button G
to return to the main interface.
Hydraulic screen (Page 501)
The signal value of each pressure sensor of
the hydraulic system is displayed in
sequence in this screen, which is not for
changing but for monitoring.
The value is displayed as the following
order:
‐ Pressure of driving system
‐
Pressure of discharge conveyor
‐ Lower conveyor pressure.
‐
Oil temperature of hydraulic system
Press button G to return to the main interface.
(Page 601)
Input password to enter this screen.
No change in the page if the password is
not correct, press button G to return to
the main screen.
Shift into the calibration screen (BODAS
Service) if the password is correct.
Warning Screen (page 701)
Press button B to check current fault.
Press button D to check non-current
fault, and press button G to return to
the main screen.
B
C
D
E
F
G
B
C
D
E
F
G
B
C
D
E
F
G