Dynapac PL2000F, Instruction Manual

Page: 260 / 283

Maintenance
249
4812313240.pdf
2017-12-1
Feed pump
Drain water
When the temperature is below freezing, the
water in the pump must be drained since freezing
water can destroy the pump.
Replace oil
The feed pump is located on the left forefront of
the machine.
- Remove the oil drainage screw (1) and collect
draining oil.
- Remove the filling screw (2).
- After all the oil has drained, properly screw
the drainage screw (1) back in.
- Fill the stipulated quantity of new oil via the
opened filling cover.
- Properly screw the filling screw (2) back in.
Wear protective clothing when working
with hot oil. Danger to health if oil contacts
skin.
Collect used oil in a suitable container
and dispose of properly.
When adding oil, ensure cleanliness.
When the temperature is below freezing, the
water in the pump must be drained since freezing
water can destroy the pump.
- Remove the drainage screw (3) and let the
water drain completely.
- Properly screw the drainage screw (1) back in.
Fig. 1. Drainage screw
2. Filling screw
3. Drainage screw