Dynapac PL2000F, Instruction Manual

Page: 237 / 283

226
Maintenance
4812313240.pdf
2017-12-1
Return hydraulic filter
Replace the filter element according to the
soiling display, but at least once a year!
The return hydraulic filter can be found on the
hydraulic oil tank in the left section of the engine
compartment and is accessible once the engine
hood has been opened.
- Remove the fastening screws of the filter top and
remove the lid of the filter casing.
- Pull the entire filter insert from the casing.
- Pull the intermediate plate (1) and the dirt
collection dish (2) from the used filter element.
- Clean the dirt collection dish.
- Insert the intermediate plate and the dirt
collection dish on to the new filter element and
insert it into the filter casing.
- Slightly lubricate the O-ring of the casing cover
and install using the four fastening screws.
Wear protective clothing when working
with hot oil. Danger to health if oil contacts
skin..
Never clean a filter and then re-use it!
Always use new filters.
Dispose of used filters properly.
1
2
Fig. 1. Intermediate plate
2. Dirt collection dish