Dynapac PL2000F, Instruction Manual

Page: 177 / 283

Operation
166 4812313240.pdf
2017-12-1
‐ Insert ignition key lock in position”0”.
‐ Switch ignition on (pos.1).
Start screen appears on the display, position
indicator of main operating panel light up.
‐ The start screen (4) is displayed while, the
on-board computer is booting up.
‐
Once the booting procedure is complete,
the main screen (5) appears on the
display.
‐ Press the start button (6).
See button function description from “Machine
description” chapter.
Press the horn button before starting.
The machine cannot be started if the control
lever and function keys are not in position 0
or if one of the emergency stop button is
pressed. ((7) shown on display).
If the engine does not start straightway,
continue starting for a maximum of 20
seconds without a break, then wait 1 minute.
‐ Press the button to start the planer.
‐
Use the display to check the operating and
setting values, correct if necessary.
‐ Allow the machine to warm up if
necessary.
6
4
5
7
Fig. 4. Start screen;
5. Main screen; 6. Start/stop button;