Dynapac PL2000F, Instruction Manual

Page: 258 / 283

Maintenance
247
4812313240.pdf
2017-12-1
Water system
Water tank
The filling level of the water tank should be tested
before each start. If necessary, the tank must be
refilled.
Check the water level of the water tank several
times a day using water level indicators located on
the sides of the tank.
The water tank should preferably be cleaned
when it is empty.
If the machine is not in continuous operation, the
water should be replaced once per year.
- Fully drain the tank by opening the drain valve
(1) on the underside of the machine.
- To drain out all the residue, open the two outlet
points (2) on the left and right of the machine
underside.
Opening (3) serves as an overflow if the tank is
overfilled.
The cover of water tank can be unscrewed out.
- With the high-pressure cleaner, spray the
inside of the empty tank.
If necessary, a person can climb through the
opened lid into the tank in order to execute
cleaning work.
- The loosened sediments run out through the
opened drainage valve.
- After cleaning, close the drainage valve and
the locking lid of the water tank again.
Fig. 1. Valve
2. Outlet points
3. Port
2
3