Dynapac PL2000F, Instruction Manual

Page: 46 / 283

Machine description
35
4812313240.pdf
2017-12-1
and errors are noted and can be corrected
immediately.
Engine: The machine is fitted with a powerful
6-cylinder Cummins turbo diesel engine which
effortlessly covers the power requirements of the
large planer. This engine has electronic engine
management which also automatically adapts it to
the extreme operating and environmental
conditions and therefore keeps its torque stable.
The engine cover is noise-insulated as standard
so that operating staff and the surrounding area
are subjected to minimum levels of noise. It’s
complying with US EPA T3, EU stage IIIA and
China stage III exhaust standard.
Milling box: The milling section consists of the
mechanical milling drum drive, the milling drum
housing, the milling drum, the moldboard, the
sliding shoe and the side boards.
All these elements are precisely tuned to one
another and their designs adapted so that high
performance milling is assured with low levels of
milling tool wear, as is very good retrieval,
granulation and transport of the milled product, an
exact milling pattern with cleaner milling edges is
produced and the processed area is kept clean
and free of milling product which has not been
retrieved.
-
The mechanical milling drum is driven by the
diesel engine via a hydraulic separating
clutch, belt pulleys and a high efficient poly-V
belt on a planetary gear directly connected
with the drum body. This guarantees a
low-loss transfer of power intercepts load
impact and has a long service life. The drive
is fitted with an automatic belt tensioning
fixture. The hydraulically selectable 3-pulley
dry-plate clutch and the two-stage planetary