Dynapac PL2000F, Instruction Manual

Page: 84 / 283

Machine description
73
4812313240.pdf
2017-12-1
Pos. Designation Symbol Brief description
3
Control lever
for travel
drive and
steering
The driving and steering direction are
controlled by the dual-axis control lever.
- Turn the control lever to the left, the
vehicle is swiveled to the left (the selection
of steering mode is required, and it
defaults to front drive units steering. The
rear drive units are required to follow in
positive and negative directive when it is in
crab steering or all steering mode. )
- Turn it to the right, the planer is swiveled
to the right.
- Push it forward, the planer moves
forward.
- Pull it backward, the planer moves
backward. If this function is engaged, the
milling drum is deactivated.
- The top button is used for electrically
locking/unlocking the drive units.
4 Horn For switching on the horn.
5
Control lever
for discharge
conveyor
The direction of the discharge conveyor is
controlled by the dual-axis control lever.
- Turn the control lever to the left, the
discharge conveyor is swiveled to the left.
- Turn it to the right, the conveyor is
swiveled to the right.
- Push it forward, the conveyor is lowered.
- Pull it backward, the conveyor is raised.
- Rotate the knob clockwise, the speed of
discharge conveyor is increased.
- Rotate the knob anticlockwise, the speed
is decreased.
- Press the button on the control lever, the
conveyor starts to work.