Dynapac PL2000F, Instruction Manual

Page: 16 / 283

Safety - General instructions
5
4812313240.pdf 2017-12-1
Safety - General instructions
(Also read the safety manual)
1. Read the entire manual before starting the machine and before
carrying out any maintenance. Do not remove the manual from
the machine. Replace the instruction manual if lost, damaged or
unreadable.
2. The safety manual supplied with the machine must be read by
all planer operators. Always follow the safety instructions. Do
not remove the manual from the machine.
3. Only trained and/or experienced operators should be allowed
to drive the planer. It is prohibited to take passengers on the
planer.
4. Never use the planer if it is in need of adjustment or repair.
5. Only climb up or down from the planer when it is stationary. Use
the intended grips and rails. Always use the three-point grip
(both feet and one hand, or one foot and both hands) when
mounting or dismounting from the machine. Never jump down
from the machine.
6. Drive carefully on sharp bends.
7. Avoid driving across slopes. Drive straight up or straight down the
slope.
8. Make sure that the underlying surface is sufficiently stable.
9. Make sure that there are no obstacles in the direction of
travel, on the ground, in front of or behind the planer, or
overhead.
10. Drive particularly carefully on uneven ground.
11. Use the safety equipment provided.
12. Keep the planer clean. Immediately remove any dirt or grease
from the operator platform. Keep all signs and labels clean and
fully legible. Replace damaged plates and labels.
13. Safety measures before refueling:
- Shut off the engine
- Do not smoke
- No naked flame in the vicinity of the machine
- Ground the filling device nozzle to the tank to avoid sparks