Dynapac PL2000F, Instruction Manual

Page: 244 / 283

Maintenance
233
4812313240.pdf
2017-12-1
Bottom plate
The condition of the bottom plates of the
drives is to be tested daily.
Damaged and worn bottom plates should be
replaced immediately.
Each bottom plate is connected with the contact
surface of the chain link by four fastening screws.
- Hold the square nut with a fork wrench fork
wrench, loosen the fastening bolts in the trough of
the bottom plate using a socket wrench and
dismantle.
The bottom plates and fastening bolts should
always be replaced together.
- Install the new bottom plate in the same
manner; tighten the bolts with the required torque.
Problem-free bottom plates also ensure that the
machine will drive straight ahead with no
problems.
Rubber pad
Each rubber pad is connected with bottom plates
by four fastening screws.
Damaged and worn rubber pads should be
replaced immediately.
Install the new rubber pad in the same manner,
tighten the bolts with the required torque.
Fig. Bottom plate