Dynapac PL2000F, Instruction Manual

Page: 195 / 283

Miscellaneous
184 4812313240.pdf
2017-12-1
Lashings
- The lashings 1-14 comprise a lashing strap or chain with a permitted load (LC/MSL)
of at least in table 1.
-The lashings are re-tightened as required, the lashing preload should follow the
lashing supplier instruction.
- Each of lashings 1-14 is a single lashing. One end on the machine, another end on
the platform.
- Lashings in the same direction are placed in different lashing mounts on the trailer.
- The lashing hooks must not lose grip if the lashings become slack.
- The lashings are protected against sharp edges and corners.
- The lashings are located symmetrically in pairs on the right and left sides.
Make sure that the lashing equipment, e.g.
chains, blocks and attachments in the transport
vehicle, are approved and have the requisite
breaking strain for the mode of transport. The
lashing must be held tensioned during the entire
transport.