Dynapac PL2000F, Instruction Manual

Page: 79 / 283

Machine description
68 4812313240.pdf
2017-12-1
Pos. Designation Symbol Brief description
26 Milling drum
At the touch of the button, the milling drum starts
working, and stops when it is released. The
activated function is confirmed by LED.
The milling drum drive can only be engaged at
idle speed
27
Automatic
mode
At the touch of the button, the system enters into
automatic control mode.
After the conveyor and water pump functions are
running in auto mode, press the conveyor or
water pump manual button, LED flashes and auto
function stops.
Press conveyor or water pump manual button
again, auto function is ON again.
28 Set-up button
As an aid for start of milling. When stationary,
lowers the machine to the preselected milling
depth at the touch of the button. The activated
function is confirmed by LED. Press the button
again to exit from this mode and stops lowering.
29
Moving
forward
indication of
loader
At the touch of the button, the forward indicating
light of loader is switched on.
30
Stop
indication of
loader
At the touch of the button, the stop indicating light
of loader is switched on.